REDARC Dual Sensing Smart Start Battery Isolator 12V 100A

The REDARC Smart Start® SBI12D is a microprocessor controlled battery isolator used in a dual battery system. It is designed to be used in dual battery systems as a solenoid priority system to protect the start battery from excessive discharge. The SBI12D provides 12 volt DC incorporating 100A of continuous ratings.

Dual Sensing

The dual sensing model is used to isolate the start and auxiliary batteries in a system where the auxiliary battery may also be charged by an external source such as Solar panels or an external AC battery charger. The SBI12D also allows the start battery to be charged by the external source once the auxiliary battery reaches 13.2 volts. This is useful to top up the start battery.

Power Saving Technology

The Smart Start SBI12D incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. It features sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions.

Used primarily in 4WD and commercial vehicles, the Smart Start SBI is a safe way to charge an auxiliary battery and should often be installed with a high quality fuse kit.

Features

• Overmould design
• Compact in size and easy to install
• Silver contacts for longer life and suitable for marine applications
• Power saving technology
• Fault indication
• Fully surge protected

Not sure what dual battery system is best for your vehicle? Let Shaun Whale explain more.

REDARC recommends that our products are installed by a qualified auto electrician or technician. We recommend product installation through a member of the REDNetwork, suitably qualified auto electrician or installer which can be found using the Find An Installer tool on the REDARC website. 

SpecificationsSpecifications More Information

gtin_barcode	9338628001330
brand	REDARC
Max. Inrush Current	400A
Max. Continuous Current	100A
Turn On Voltage	13.2V
Turn Off Voltage	12.7V
Turn On Delay	5 seconds
Turn Off Delay	10 seconds
Standby Current	<5mA
Weight	7 oz (200 g)
height	2.48" (70 mm)
width	2.95" (75 mm)
depth | length	3.15" (80 mm)
Warranty	2 Years
System Voltage	12V
Output Voltage	12V DC
Input Fuse Rating	100A
Output Fuse Rating	100A

SHIPPING & RETURNSSHIPPING & RETURNSShipping

REDARC offers customers free freight within Australia on products purchased via the REDARC website, unless a dangerous goods charge is deemed necessary in order to ship products of a lithium chemistry.All products have a 5 day lead time before shipment after which it will be shipped via your preferred shipping method. For alternative freight options please contact REDARC at power@redarc.com.au

For international orders, freight will be calculated at time of checkout. Orders will be shipped from our factory in Lonsdale with delivery timeframes dependant on location.

Where orders are shipped to a delivery address outside Australia, you are responsible for the compliance terms as written in our Website Terms of Use

Returns

The terms and conditions relating to 'Return of goods' set out in our Trading Terms will apply to all good purchased by You via the Site. All goods purchased by You via the Site also come with a manufacturer's warranty found here.

YOU MAY REQUIRE ADDITIONAL PARTS

This product may require additional parts to complete installation.

ADD ALL TO CART

1. 100A Fuse Kit FK100 NZ$178.85 Add to Compare Add to Cart The REDARC 100A Fuse Kit is designed for Smart Battery Isolator installations. It is equipped with the best quality fuses and fuse holders to fit the cable needed to make a solid connection.
2. 60A Fuse Kit FK60 NZ$96.47 Add to Compare Add to Cart The REDARC 60A Fuse Kit is designed to provide a simple, neat fuse installation for dual battery systems.

RELATED PRODUCTS

1. 12V 100A Smart Battery Isolator SBI12 NZ$269.89 Add to Compare Add to Cart The REDARC Smart Start SBI12 100A is a 12V DC 100A microprocessor-controlled, dual battery isolator designed to protect the start battery from excessive discharge while allowing the auxiliary battery to supply charge to non-essential loads.
2. 100A Fuse Kit FK100 NZ$178.85 Add to Compare Add to Cart The REDARC 100A Fuse Kit is designed for Smart Battery Isolator installations. It is equipped with the best quality fuses and fuse holders to fit the cable needed to make a solid connection.
3. 12V 200A Dual Smart Battery Isolator SBI212D Out of stock NZ$627.58 Add to Compare Notify me The REDARC Smart Start SBI212D 200A dual battery isolator enables the user to charge a 12 volt start battery from a solar panel or battery charger on the auxiliary battery.

HAVE A QUESTION?

FIND LOCAL INSTALLERTECH HELP

Need a little help with choosing the right product? We're here to help! You can use our handy vehicle look-up tool, find a local installer or stockist in your area or check out our FAQs.

Still not sure? Don't stress, you can contact our helpful Tech Support Team by phone or email too.

Delivery

Shipped direct from REDARC's New Zealand distribution centre to your door. Typically dispatched within 2 working days. Full REDARC NZ warranty, backed by MEDA support.